TRISTAR CLEANING TOOLS 1/4" - 1" (6.4 - 25.4MM)

    
  

BRUSHES :
Nylon Brushes : Recommended for removing Soft deposits (Mud, algae, etc.) in Straight Ferrous and Non Ferrous Tubes (Copper, Stainless, Brass, etc)

Stainless Steel Brushes : Recommended for removing Soft and Light Scale deposits in Straight Ferrous Tubes (Stainless Steel, Carbon Steel)

Brass Brushes : Recommended for removing Soft and Light Scale deposits in Straight Ferrous and Non Ferrous Tubes. Brush should be (Stainless Steel, Brass, Copper, etc.)

Brush O. D.

Nylon Brushes

Stainless Steel Brushes

Brass Brushes

Threading

Coupling

inch

mm
1/4 6.4 TN - 250 TSS - 250 TB - 250 8 - 32 F TP - 1(8.32 m X 8.32 M)
5/16 7.9 TN - 312 TSS - 312 TB - 312 8 - 32 F TP - 1(8.32 m X 8.32 M)
3/8 9.5 TN - 375 TSS - 375 TB - 375 12 - 24 F TP - 2(8.32 m X 12.24 M)
7/16 11.1 TN - 437 TSS - 437 TB - 437 1/4 - 28 M TP - 2(8.32 m X 12.24 M)
1/2 12.7 TN - 500 TSS - 500 TB - 500 1/4 - 28 M TP - 2(8.32 m X 12.24 M)
9/16 14.3 TN - 562 TSS - 562 TB - 562 1/4 - 28 M TP - 2(8.32 m X 12.24 M)
5/8 15.9 TN - 615 TSS - 615 TB - 615 1/4 - 28 M TP - 2(8.32 m X 12.24 M)
11/16 17.5 TN - 687 TSS - 687 TB - 687 1/4 - 28 M TP - 2(8.32 m X 12.24 M)
3/4 19.1 TN - 750 TSS - 750 TB - 750 1/4 - 28 M TP - 2(8.32 m X 12.24 M)
13/16 20.6 TN - 812 TSS - 812 TB - 812 1/4 - 28 M TP - 2(8.32 m X 12.24 M)
7/8 22.2 TN - 875 TSS - 875 TB - 875 1/4 - 28 M TP - 2(8.32 m X 12.24 M)
15/16 23.8 TN - 937 TSS - 937 TB - 937 1/4 - 28 M TP - 2(8.32 m X 12.24 M)
1 25.4 TN - 1000 TSS - 1000 TB - 1000 1/4 - 28 M TP - 2(8.32 m X 12.24 M)

Note: Brush should be equal to or 1/16" (1.6mm) Smaller then Tube I.D. 9/16" - 1" (14.3-25.4mm) Brushes can be used for both Clockwise and Counterclockwise rotation.

ADJUSTABLE BUFFING TOOLS : 
Stainless Steel Wire Buffing Tools are used for removing Light to Medium Scale deposits or finishing tube previously roughed out with other Cleaning Tools. They can be used in both Ferrous and Non Ferrous Tubes. Buffing Tools can be used in Clockwise Directions and cannot be used in internally Buffing Tools.

Tube I.D.

Buffing Tool

Buffing Tool with Drill Tip

Replacement Blades

Adjusting Tie

inch

mm
5/16 - 3/8 7.9 - 9.5 TBT - 203 TBT - 203 DT TBT - 207 TBT - 209
3/8 - 1/2 9.5 - 12.7 TBT - 204 TBT - 204 DT TBT - 207 TBT - 209
1/2 - 9/16 12.7 - 14.3 TBT - 205 TBT - 205 DT TBT - 208 A TBT - 209
5/8 - 1 15.9 - 25.4 TBT - 206 TBT - 206 DT TBT - 208 B TBT - 209

Back

Top

Next

Home
 Tristar Home

Profile

Market

Form

E-Mail