![]() |
TRISTAR CLEANING TOOLS 1" (25.4MM) AND ABOVE |
|
CARBIDE DRILLS : |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
Note : All Drills run 10% Oversize (e.g. TCB - 075 Drill is 0.820" (21 mm O.D.) |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
WHEEL BRUSH ASSEMBLIES : |
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
Curved Tube Wheel Brush Assemblies : Recommended for removing Soft and Light Scale deposits in Curved Tubes. Each assembly consists of Single Stainless Steel Wire Wheel Brushes attached to each end of a Universal Joint. Brush should be 1/4" - 3/8" (6.4 - 9.5mm) smaller than Tube I. D. |
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
Tube I.D. |
Wheel Brush Assembly |
Actual Brush O.D. |
Replacement Brushes |
Replacement Universal Joint |
Replacement Retainer Bolt |
|
|
inch |
mm |
|||||
| 1.1/8 - 1.1/4 | 29 -32 | TWBS - 100 | 1"(25.4mm) | TWBR - 100 | TCUJ - 002 | TCWB - 001 |
| 1.3/8 - 1.1/2 | 35 - 38 | TWBS - 125 | 1.1/4"(32mm) | TWBR - 125 | TCUJ - 003 | TCWB - 001 |
| 1.5/8 - 1.3/4 | 41 - 45 | TWBS - 150 | 1.1/2"(38.1mm) | TWBR - 150 | TCUJ - 004 | TCWB - 001 |
| 1.7/8 - 2 | 48 - 51 | TWBS - 175 | 1.3/4"(44.5mm) | TWBR - 175 | TCUJ - 004 | TCWB - 002 |
| 2.1/8 - 2.1/4 | 54 - 57 | TWBS - 200 | 2"(50.8mm) | TWBR - 200 | TCUJ - 004 | TCWB - 002 |
| 2.3/8 - 2.1/2 | 60 - 64 | TWBS - 225 | 2.1/4"(57.1mm) | TWBR - 225 | TCUJ - 004 | TCWB - 002 |
| 2.5/8 - 2.3/4 | 67 - 70 | TWBS - 250 | 2.1/2"(63.5mm) | TWBR - 250 | TCUJ - 004 | TCWB - 002 |
| 2.7/8 - 3 | 73 - 76 | TWBS - 275 | 2.3/4"(70mm) | TWBR - 275 | TCUJ - 004 | TCWB - 002 |
| 3.1/8 - 3.1/4 | 79 - 83 | TWBS - 300 | 3"(76.2mm) | TWBR - 300 | TCUJ - 004 | TCWB - 002 |