Tristar Double Hex Industrial Sockets (Manual Applications)

    

INTRODUCTION :

The standard range covers bolt/nut across flat sizes from 5.5 mm to 85 mm in various square drive sizes of 1/4", 3/8", 1/2", 3/4", 1". To accommodate long studs, deep sockets are also available for the above range. The sockets have a positive locking design for its attachment with the driving Tools having spring loaded ball & button.
This is a safety feature for the operator working in difficult areas. These sockets are designed for extra high torque applications to meet industrial needs.

SIZES :
Range of sizes are available in various Square Drives. We can also provide sockets for any non standard square drive size / nut size. (Click on the Square Drive sizes to see specification)



TRISTAR DOUBLE HEX INDUSTRIAL SOCKETS (METRIC SIZES)                      1/4 " (6.3 mm)
 A Standard B Deep
Part No. Across Flat D D1 T L Part No. Across Flat Bolt
Clearance
Depth		 Approx.
OAL (mm)
TM - 15.5 5.5 9 15 8 25
TM - 15.5 D
 5.5 41 50
TM  -  16 6 10 15 8 25 TM  -  16 D 6 41 50
TM  -  17 7 11 15 10 25 TM  -  17 D 7 41 50
TM  -  18 8 12.5 15 10 25 TM  -  18 D 8 41 50
TM  -  19 9 14 15 10 25 TM  -  19 D 9 41 50
TM - 110 10 15 15 10 25 TM - 110 D 10 41 50
TM - 111 11 16.5 15 10 25 TM - 111 D 11 41 50
TM - 112 12 17.5 16 12 27 TM - 112 D 12 41 50
TM - 113 13 18.5 16 12 27 TM - 113 D 13 41 50
TM - 114 14 20.5 16 13 38 TM - 114 D 14 41 50

TRISTAR DOUBLE HEX INDUSTRIAL SOCKETS ( INCH SIZES {SAE} )               1/4 " (6.3 mm)
 A Standard B Deep
Part No. Across Flat D D1 T L Part No. Across Flat Bolt
Clearance
Depth		 Approx.
OAL (mm)
T - 114 1/4" 10.5 15 8 25 T - 114 D 1/4" 41 50
T - 115 9/32" 11 15 10 25 T - 115 D 9/32" 41 50
T - 116 5/16" 12.5 15 10 25 T - 116 D 5/16" 41 50
T - 117 11/32" 14 15 10 25 T - 117 D 11/32" 41 50
T - 118 3/8" 15 15 10 25 T - 118 D 3/8" 41 50
T - 119 7/16" 16.5 15 12 27 T - 119 D 7/16" 41 50
T - 120 1/2" 18 16 12 27 T - 120 D 1/2" 41 50
T - 121 9/16" 20.5 16 13 28 T - 121 D 9/16" 41 50

NOTATIONS INDICATE FOLLOWING DIMENSIONS :
D :  Outside Diameter of Socket at Hex End.
D1 :  Outside Diameter of Socket at Square End.
T :  Hex Wrench Opening Length.
L :  Over All Length.

Top
Next
 Products Profile Market Form E-Mail