TRISTAR DOUBLE HEX INDUSTRIAL SOCKETS (METRIC SIZES)                         3/8 " (10 mm)

A Standard

B Deep

Part No.	Across Flat	D	D1	T	L		Part No.	Across Flat	Bolt Clearance Depth	Approx. OAL (mm)
TM - 206	6	10	21	10	30		TM - 206 D	6	42	54
TM - 207	7	11	21	10	30		TM - 207 D	7	42	54
TM - 208	8	13	21	10	30		TM - 208 D	8	42	54
TM - 209	9	13.5	21	10	30		TM - 209 D	9	42	54
TM - 210	10	15	21	10	30		TM - 210 D	10	42	54
TM - 211	11	16.5	21	12	30		TM - 211 D	11	42	54
TM - 212	12	18	21	12	30		TM - 212 D	12	42	54
TM - 213	13	19	21	12	30		TM - 213 D	13	42	54
TM - 214	14	21	21	13	30		TM - 214 D	14	48	60
TM - 215	15	22	22	14	32		TM - 215 D	15	48	60
TM - 216	16	24	22	14	32		TM - 216 D	16	48	60
TM - 217	17	25	22	14	32		TM - 217 D	17	54	66
TM - 218	18	26	22	14	32		TM - 218 D	18	54	66
TM - 219	19	27	25	16	32		TM - 219 D	19	54	66
TM - 220	20	28	25	16	33		TM - 220 D	20	54	66
TM - 221	21	29	25	18	35		TM - 221 D	21	54	66
TM - 222	22	29	25	18	35		TM - 222 D	22	54	66

TRISTAR DOUBLE HEX INDUSTRIAL SOCKETS ( INCH SIZES {SAE} )                 3/8 " (10 mm)

A Standard

B Deep

Part No.	Across Flat	D	D1	T	L		Part No.	Across Flat	Bolt Clearance Depth	Approx. OAL (mm)
T - 214	1/4"	10.5	21	10	30		T - 214 D	1/4"	42	54
T - 216	5/16"	13	21	10	30		T - 216 D	5/16"	42	54
T - 218	3/8"	14.5	21	10	30		T - 218 D	3/8"	42	54
T - 219	7/16"	17	21	12	30		T - 219 D	7/16"	42	54
T - 220	1/2"	19	21	12	30		T - 220 D	1/2"	42	54
T - 221	9/16"	21	21	12	30		T - 221 D	9/16"	42	54
T - 223	5/8"	24	22	14	32		T - 223 D	5/8"	42	54
T - 224	11/16"	25	22	14	32		T - 224 D	11/16"	54	66
T - 225	3/4"	27	22	16	32		T - 225 D	3/4"	54	66
T - 227	13/16"	29	22	18	33		T - 227 D	13/16"	54	66
T - 228	7/8"	29	22	18	35		T - 228 D	7/8"	54	66
T - 230	1"	30	25	20	36		T - 230 D	1"	60	70

NOTATIONS INDICATE FOLLOWING DIMENSIONS :

D	:	Outside Diameter of Socket at Hex End.
D1	:	Outside Diameter of Socket at Square End.
T	:	Hex Wrench Opening Length.
L	:	Over All Length.

---

Back	Top	Products	Profile	International	Form	E-Mail