Tube Cutting Tools
|
Tube Cutting Tools |
 |
'PUSH TYPE
INTERNAL TUBE CUTTERS, POWER OPERATED FOR FERROUS/NON FERROUS TUBES During tube Removal Operation from Tube Sheets in Condensers and Heat Exchangers, Push Type Internal Cutter quickly cut the walls of Ferrous tubes. Tristar push type Internal cutter can be used with a Portable Electric or Pneumatic Drill Machine. The Cutter is suitable for reaching into tubes, at various distances from tube, due to an Adjustable Collar provided. A Range of tools available to cover Tubes of sizes :-5/8" to 1.1/4" O. D. |
| |
|
'ONE REVOLUTION INTERNAL TUBE CUTTER FOR NON FERROUS TUBES One revolution Internal tube Cutter pierces and cuts off Non Ferrous Tubes in condensers and coolers. One Revolution tube cutter is designed for hand Operation using a ratchet handle . This cutter is once again suitable for reaching into Tube at various distances from tube end, due an Adjustable collar provided. A Range of tools available to cover Tubes of sizes :-1/2" to 2.1/2" O. D. |
| |
TUBE END FACERS TRISTAR tube End Facers are designed for Tube End Facing Operation after Tube expansion in tube Sheets. use of Tube End Facers facilitates uniform Tube End projection of Tubes in Tube Sheet. (Tube End facers are available to suit range of tube sizes from 1/" O. D. to 1.12 O. D.) A Range of Tube Installation tools like Tube Plugs, Tube guides, Belling and Flaring tools are also available. |
| Other Products | |
 |
HEAT EXCHANGER & CONDENSER |
 |
BOILER & SUGAR INDUSTRY |
|
TORQUE CONTROLLED TUBE EXPANSION SYSTEM |
|
AUTOMATE INTERNAL GROOVING TOOLS |
|
TUBE REMOVAL TOOLS |
|
TUBE EXPANSION |
 |
 |
 |
 |
 |
 |
 |
| Back | Top | Profile | Market | Form |