Nut Runners (For Pneumatic Screw Drivers)

INTRODUCTION

This tool is designed for operation with a Pneumatic Screw Drivers. Nut Runners has a male hex drive on one end which fits into the female hex shank of the pneumatic screw driver and on the other end is a single hex socket. The range covers 1/4" (6.3 mm) and 5/16" (8 mm) hex drive for nut sizes ranging from 8 mm to 13 mm in three lengths i.e. 75 mm, 100 mm and 150 mm.

Other sizes including SAE can be supplied. We can also cater to the requirement of screw driver bits of various types like Philips, Torx, Allen bits, Pozidriv, etc. of Zephyr USA make.

SPECIFICATIONS : (Drive End - Male Hex & Socket End Female Hex)

Part No.	Hex Drive	Across Flat	Approx. OAL
METRIC
TNR   -   18	1/4"	8	75
TNR  -  18L	1/4"	8	100
TNR  -  18X	1/4"	8	150
TNR  -  110	1/4"	10	75
TNR - 110L	1/4"	10	100
TNR - 110X	1/4"	10	150
TNR  -  111	1/4"	11	75
TNR - 111L	1/4"	11	100
TNR - 111X	1/4"	11	150
TNR  -  113	1/4"	13	75
TNR - 113L	1/4"	13	100
TNR - 113X	1/4"	13	150
TNR  -  808	5/16"	8	75
TNR - 808L	5/16"	8	100
TNR - 808X	5/16"	8	150
TNR  -  810	5/16"	10	75
TNR - 810L	5/16"	10	100
TNR - 810X	5/16"	10	150
TNR  -  811	5/16"	11	75
TNR - 811L	5/16"	11	100
TNR - 811X	5/16"	11	150
TNR  -  813	5/16"	13	75
TNR - 813L	5/16"	13	100
TNR - 813X	5/16"	13	150

---

Back	Top	Products	Profile	Market	Form	E-Mail