(Impact Applications)
|
(Impact Applications) |
INTRODUCTION
| All Impact Sockets, including those for High Torque Hydraulic Torque Wrenches, provided by TRISTAR TOOLS (from 1/2" Square Drive to 3 1/2" Square Drive) carry a performance guarantee against pneumatic failure. The reason behind this is that Tristar Impact Sockets are designed with extra wall thickness and are made from High Strength Special Alloy Steel. Tristar Impact Sockets undergo a specialised double cycle heat treatment process for an optimum hardness, which helps to absorb the impact load they are subjected to during use. |  |
SIZES :
Range
of sizes available in various Square Drive. We can also provide sockets
for any non standard square drive size/nut size.
 |
 |
 |
 |
 |
 |
 |
TRISTAR SINGLE HEX IMPACT SOCKETS (METRIC SIZES) 1/4 " (6.3 mm)
| A Standard | B Deep |
| Part No. | Across Flat | D | D1 | T | L | Part No. | Across Flat | Bolt
Clearance Depth |
Approx.
OAL (mm) |
|
| TIM - 16 | 6 | 11 | 17 | 8 | 25 | TIM - 16 D | 6 | 41 | 50 | |
| TIM - 17 | 7 | 13 | 17 | 8 | 25 | TIM - 17 D | 7 | 41 | 50 | |
| TIM - 18 | 8 | 14.5 | 17 | 10 | 25 | TIM - 18 D | 8 | 41 | 50 | |
| TIM - 19 | 9 | 15.5 | 17 | 10 | 25 | TIM - 19 D | 9 | 41 | 50 | |
| TIM - 110 | 10 | 16.5 | 17 | 10 | 25 | TIM - 110 D | 10 | 41 | 50 | |
| TIM - 111 | 11 | 17.5 | 17 | 10 | 25 | TIM - 111 D | 11 | 41 | 50 | |
| TIM - 112 | 12 | 19 | 17 | 12 | 25 | TIM - 112 D | 12 | 41 | 50 | |
| TIM - 113 | 13 | 20 | 17 | 12 | 25 | TIM - 113 D | 13 | 41 | 50 | |
| TIM - 114 | 14 | 21.5 | 17 | 13 | 25 | TIM - 114 D | 14 | 41 | 50 |
TRISTAR SINGLE HEX IMPACT SOCKETS ( INCH SIZES SAE ) 1/4 " (6.3 mm)
| A Standard | B Deep |
| Part No. | Across Flat | D | D1 | T | L | Part No. | Across Flat | Bolt
Clearance Depth |
Approx.
OAL (mm) |
|
| TI - 114 | 1/4" | 12 | 17 | 8 | 25 | TI - 114 D | 1/4" | 41 | 50 | |
| TI - 115 | 9/32" | 13.5 | 17 | 10 | 25 | TI - 115 D | 9/32" | 41 | 50 | |
| TI - 116 | 5/16" | 14.5 | 17 | 10 | 25 | TI - 116 D | 5/16" | 41 | 50 | |
| TI - 117 | 11/32" | 16 | 17 | 10 | 25 | TI - 117 D | 11/32" | 41 | 50 | |
| TI - 118 | 3/8" | 16.5 | 17 | 10 | 25 | TI - 118 D | 3/8" | 41 | 50 | |
| TI - 119 | 7/16" | 17.5 | 17 | 12 | 27 | TI - 119 D | 7/16" | 41 | 50 | |
| TI - 120 | 1/2" | 19.5 | 17 | 12 | 27 | TI - 120 D | 1/2" | 41 | 50 | |
| TI - 121 | 9/16" | 21.5 | 17 | 13 | 28 | TI - 121 D | 9/16" | 41 | 50 |
NOTATIONS INDICATE FOLLOWING DIMENSIONS :
| D | : | Outside Diameter of Socket at Hex End. |
| D1 | : | Outside Diameter of Socket at Square End. |
| T | : | Hex Wrench Opening Length. |
| L | : | Over All Length. |
 |
 |
 |
 |
 |
 |
 |
| Top |
|
Products | Profile | Market | Form |